136-sw- ASCHER RACING - Steering Wheel F64-USB V3 (Wireless-Simucube 2)

689 Rigs

Precio habitual $2,073.30

Los gastos de envío se calculan en la pantalla de pagos.

*No nos hacemos responsables por los tiempos de demora de los distintos proveedores, tenemos un estimado de 3 a 5 semanas aprox para la mayoría de los productos disponibles

*Los precios no incluyen IVA

  • DESCRIPTION

    • Product Summary
      • Compatible with Simucube Wheelbases
      • 285mm diameter
      • Maximum grip level from closed, ergonomic rubber grips
      • 14 x push buttons with tactile feeling
      • 2 x multifunctional 7-way joysticks
      • 2 x encoders (inc. push button functionality)
      • 2 x 12-position rotary switches
      • 2 x thumb encoders
      • Magnetic paddle shifters
      • Contactless motorsport clutch paddles
    • Simucube Wireless
      • Wireless connection to SC2
      • SC1 (Simucube 1): additional receiver module required
      • Low latency
      • Low energy consumption: 2-3 years of battery life on heavy daily usage
      • Standard 14250 Lithium battery for maximum capacity
      • Easy to swap battery via back side access window
      • Button inputs via Simucube – no additional Windows controller
      • Hot swapping wheels in-game without reconfiguring inputs
      • Maximum signal quality via external stub antenna
    • New features
      • Compared to its previous model, the F64-SC V3 features new encoder, joystick and rotary knobs, as well as new thumb encoders and new motorsport clutches.
      • New knobs improve the ergonomics and the feedback of the buttons
      • New thumb encoders allow to change setting while driving without taking the hand off the wheel
      • New motorsport clutch
        • Smooth operation due to pre-tensioned ball bearing design 
        • Waterproof, shock resistant, wide temperature range 
        • Contactless, on-axis hall sensor for linear & unlimited operation 
        • Designed for harsh real racing environment
        • Precise and repeatable driver input 
    • 64 Inputs
      • 14 x push buttons with positive tactile feeling
      • 2 x protective button guards
      • 2 x multifunctional 7-way joysticks (4 directions / rotate clock- anticlockwise/ push button)
      • 2 x encoders inc. push button functionality, aluminium knob
      • 2 x 12-position rotary switches, aluminium knob
      • 2 x thumb encoders
      • 2 x paddle shifters
      • 2 x motorsport clutch paddles with electronic bite-point calibration
    • Magnetic Paddle Shifters
      • CNC machined and anodized out of automotive aluminium
      • Strong snap-action force
      • Alternative magnets to reduce force included
      • Reliable automotive switch
    • Contactless Clutch Paddles
      • contactless, on-axis hall sensor for linear & unlimited operation 
      • precise and repeatable driver input 
      • waterproof, shock resistant, wide temperature range 
      • smooth operation due to pre-tensioned ball bearing design 
      • designed for harsh real racing environment 
      • precision cnc machined aluminium design 
      • market leading compact design
    • Electronic Bite-Point Calibration
      • Precise adjustments in 1.0 % and 0.1 % increments
      • Change bite-point via configuration tool or directly on the wheel rim:

    1.                  push both joystick buttons for 1s to acces bite-point mode

    2.                  LED lights up to indicate calibration mode

    3.                  rotate left joystick for 1.0 % increments / right joystick for 0.1 % increments (LED flashes to indicate changes)

    4.                  exit calibration mode by pushing both joysticks again for 1s

      • Recommended procedure for finding best setting:

    1.                  enter calibration mode and set bite-point to high value, e.g. 80 %

    2.                  pull slave clutch only

    3.                  apply throttle

    4.                  reduce bite-point in 1.0 % increments (left joystick) until vehicle starts moving

    5.                  make test starts to fine tune desired bite-point setting

    6.                  exit bite-point calibration mode

      • Recommended procedure for quick race starts

    1.                  pull both master and slave clutches

    2.                  apply throttle

    3.                  race start -> let master clutch snap

    4.                  it will take less than 20 ms to reach desired bite-point

    5.                  slowly release slave clutch

    • Button Labels
      • 50 pcs button labels each black and white
      • 72 pcs encoder labels (blue, green, red, black, yellow, white)
      • Labels for various common steering wheel inputs
    • High Quality Finish
      • Maximum grip level from closed, ergonomic rubber grips
      • Machined out of automitive aluminium
      • Black anodized and laser engraved
      • Brushed frontplate surface finish
      • Glass bed blasted paddle surface finish
    • Compatible Wheel Bases
      •  
        • Simucube 2 
        • Simucube 1 (OSW, Mige) 
        • Accuforce*
        • Leo Bodnar** 
        • OSW (Argon)**
        • Simagic*
        • VRS Direct Force*** 
        • Fanatec Podium Hub*

    * captive screws are required
    ** Wheelbase comes without QR
    *** longer screws are required 

    SPECIFICATIONS

    • 285 mm wheel diameter
    • 6 x 70 mm bolt pattern
    • spacer may be required to create sufficient clearance to the wheel base
    • M5 x 12 mm stainless screws to mount QR included
    • Quick Release not included
    • to mount M5 threaded QRs, use captive screws
    • mass: 1140 g

    SHIPPING AND LEAD TIME

    • FREE SHIPPING to all of the Continental U.S. and Canada (excluding Yukon, Northwest Territories & Nunavut). 
    • IMPORT DUTIES COVERED for U.S.-based customers.
    • We ship from Montreal in Canada
    • Our typical lead time before shipping out orders is 5 to 7 business days. This varies depending on the purchased items and our shipping queue.
    • Once the items have shipped, transit time typically takes between 2 and 4 business days
    • Please note that all large items, such as our SimRacing Chassis, Monitor Stands and Racing Seats, might not arrive on the same day as other parts of your order. Because of their weight and size, these boxes get sorted differently at our shipping partner's logistics hub.

    WARRANTY

    (1) In the case of consumers, the statutory warranty regulations apply.
    (2) In the case of consumers, claims for damages for injury to life, body or health or based on the German Product Liability Act shall also remain unaffected.
    The same applies to any breach of duty on the part of our vicarious agents.
    (3) In the case of entrepreneurs, warranty claims other than for damages shall become statute-barred one year from delivery of the goods.
    The statutory limitation periods for recourse claims of the entrepreneur according to Section 478 German Civil Code remain unaffected thereby.

    Ascher Racing's customer service will be pleased to assist you with any questions, complaints and objections on each working day from 08:30 to 12:30 (Central European Time) hours and from 13:30 to 17:00 (Central European Time) hours, as follows:

    Phone: +49 7971 9630-180

    E-Mail: info@ascher-racing.com